Tanning bed lamps are used in every tan bed or suntan lamp on the market. When you are buying a new or especially a used tanning bed, take a good look at the bulbs. Ensure that they are real tanning lamps and meet the FDA guidelines for health and safety. You should also consider how easy it is to get at the lamps. Make sure that the bulbs are easy to change when necessary. It is quite important and a lot cheaper if you can perform such simple maintenance yourself, if you buy a home tanning bed.
There are two very different, non-interchangeable types of lamps used in low pressure and high pressure beds. You need to ensure you get the right tanning bed lamps for your sun bed, because you cannot use just any lamp you like. If you are buying replacement bulbs on the Internet, check the make and model of your existing lamps very carefully, because you have to ensure that the lamps you are ordering are suitable for your bed.
High Pressure Bulbs: high pressure beds use quartz lamps in a variety of sizes. The gases inside these bulbs have a pressure that is slightly higher than atmospheric pressure. The lamps in these beds are located in the hood of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The bed of these devices is much more comfortable than a conventional sun bed.
One of the biggest benefit of these HP bulbs is the amount of time you have to spend on the sun bed. Because you tan more quickly, you need to spend less time in the tanning salon, which means it works out cheaper. You can achieve the level of tan you require in about three weeks of three to five sessions a week. However, with a low pressure bed, it would take you at least a month to acquire the same depth of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, as opposed to four times that many visits to a low pressure salon bed. Many of these bulbs use UVA rays only, not UVB rays which cause sunburn.
Conventional Sun Bed Bulbs: Conventional, or low pressure beds use long tube lamps that look like household fluorescent tubes. The lamps are situated above and below the bed of the sun bed, which means that all the body parts are tanned at the same time, without the need to change positions during the session.
Conventional beds use UVA and UVB rays in varying mixes. Some use both rays and others emit mostly UVA with some UVB rays. UVA rays are the cause of the (premature) ageing effects on the skin and UVB rays are the burning rays that produce skin burn when you are outside in the sun. It is very important to discover which type of rays your tan bed’s bulbs emit. You must ensure you replace your existing bulbs with lamps of the same specifications after about 1,000 hours of use.
Another factor when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions are better for each type of bed. The staff at your tanning salon can help you choose a lotion that will work for the bed you are using and your skin type. No matter what bed you are using, you should certainly always use a lotion. Lotions help you tan more quickly and moisturise your skin at the same time.
Do you want to discover more about tanning bed bulbs? If so, just visit our website on tanning bed bulbs Visit the Uber Article Directory to get a totally unique version of this article for reprint.
