Tanning bed lamps, as you find in up-market tanning beds, are a big part of the secret to the Hollywood tan. You can have any depth of tan you require with the wide choice of lamps available on the market for sun beds. There are several types of bulbs, such as deep-tanning lamps, bronzing bulbs, face lamps and plenty of others too. These high-tech lamps utilize the latest technology to produce a tan evenly, and above all, safely.
Furthermore, there is a different lamp for every type of skin too. The sun bed industry produces different lamps for dark to light skin colours. On top of that, you can have a light tan, a golden tan, a bronze tan, or one the deepest of darkest tans you have ever seen. You can also change the kind of lamp, as your tan progresses, so that you can achieve any combination of quite stunning results.
A tanning lamp is like having your own sun in a bottle. In fact, it is even better, because you can control it! Modern tanning bed bulbs are manufactured to the highest specifications and are also very safe. The tanning industry and the government have set strict guidelines to guarantee your safety. So, if you carefully follow the instructions supplied with the product, you can be sure that you will not be putting your health at risk to look like a film star.
The UV rays they emit are well within prescribed safety limits to make sure you stay healthy and tanned. Furthermore, there are plenty of choices open to you, ranging from UVB and UVA combinations to pure UVA. It is your choice! So, why not get a little extra tan?
Tanning bulbs are ultraviolet-emitting devices that serve as the main element of the various types of tanning beds and booths. Tanning bed bulbs have as their main purpose the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of tanning depends on the spectrum of light emitted by the tanning bulbs and the vast majority of tanning bulbs produce more ultraviolet light than the sun.
Practically all tanning lamps use a device called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is used to make sure that the bulbs use only the exact amount of wattage that they require in order to work properly.
There are different kinds of sunbed lamps on the market including reflector sunbed lamps and high output bulbs. Most lamps fall into two main groups: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.
High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, 400 watt high pressure tanning bulbs are the most popular. They are usually included in the face tanning component of a sun bed. High pressure tanning bulbs are usually made of quartz glass and an extra specialized coating, which is necessary to filter out the very harmful UVC ultraviolet rays.
HP tanning bulbs contain a small amount of mercury or argon and create ultraviolet light in high concentration. The handling of high pressure tanning bulbs should be performed very carefully and never with naked hands, because even a tiny amount of oil from your hands can cause the bulb to fail prematurely or even crack and the resultant spillage of mercury is potentially very dangerous. High pressure tanning bulbs should be replaced after roughly 1,000 hours although they will continue to produce light for up to 10,00 hours
Low pressure tanning lamps are very similar to ordinary fluorescent lights, but the glass tube of low pressure tanning bulbs automatically filters out UVC ultraviolet rays. Low pressure bulbs have a useful lifespan of between 600 and 1,600 hours with 1,000 hours being the norm again.
Do you need to discover more about tanning bed bulbs? If so, please go over to our website on tanning bed bulbs Get a totally unique version of this article from our article submission service