It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. When ‘Green’, they are all thought to be replenishable and natural. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.
Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.
For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.
Biomass Energy Systems – Including all natural energy forms derived from plant and animal products – such as wood, straw, poultry litter and ‘energy crops’. It is extremely useful – in that it can produce a range of power sources, including heat and electricity. Indeed, within the European Markets, the UK has some of the leading levels of Biomass material at hand. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Because the system often involves one tree being planted as another is felled, many wood crops are deemed to be sustainable sources.
By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.
Geo-Thermal Energy Systems… This is primarily the heating of the Earth (mainly from the sun) and can be utilised in electricity and warm water production. Heating or cooling properties in the UK can be achieved using the ground source heat temperature of around 12 degrees centigrade. Whilst these heat pumps require energy to operate, their rate of return is excellent – being four units produced for every one unit used. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Finally, we have Hydropower; an area in which the UK does well within Europe. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. It is this type of energy production that could meet 2 percent of all the UK’s demand.
The Hydropower process uses a turbine that can convert the energy from one form into another. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. ‘Micro-Hydro’ utilises a chunk of the outdated sluices and dam systems that have been killed off by the large national distribution methods. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. Between 200 pounds and 3k per KW of energy output, is a good estimate of the overall cost of a project such as this.
Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.
Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.
(C) 2009 S. Edwards. Go to CLICK HERE or Green Engineer Certification.
